YXTEL G926 Pattern Unlock Done With Volcano Tool v2.5.3 - www.FreeComputerTricks.in

YXTEL G926 pattern lock remove, hard reset and GMail account reset done with volcano tool v2.5.3. Follow the below process to hard reset YXTEL G926 with volcano box.


YXTEL G926 hard reset done Volcano Tool




YXTEL G926 Format Done with Volcano Tool (CPU=SPD 6820/8810)


yxtel g926 format success with volcano tool


YXTEL G926 Format Log:


Detection initiated...
  Vcc: null
  Gnd: 5
  Analyzing D+ and D-...
  D+ = 3, D- = 2
  Detection D+/D- with 1.39 seconds.
  Continue to detect BOOT pin...
  Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
  UsbVcc(VCC) = 1 10, BOOT(Pull Down) = 4

  Setting...
  Find USB device:SCI USB2Serial (COM37), (VID_1782&PID_4D00)
  Pinouts setting complete!

    



  Internal version: SPRD3
  Boot downloaded.
  Start boot please wait a moment....
  Spreadtrum Boot Block version 1.1
  Boot downloaded.
  Flash ID: 00C800BC90555400
  FLASH LEN:0x20000000

  mtdparts=sprd-nand:256k(spl),512k(2ndbl),256k(params),512k(vmjaluna),10m(modem),3840k(fixnv),3840k(backupfixnv),5120k(dsp),3840k(runtimenv),10m(boot),10m(recovery),200m(system),190m(userdata),60m(cache),256k(misc),1m(boot_logo),1m(fastboot_logo),3840k(productinfo),512k(kpanic),512k(simlock)
  Analysis flash internal data successfully.
>>Set to Factory successfully.


9 comments:

  1. Detection initiated...
    Vcc: null
    Gnd: 5
    Analyzing D+ and D-...
    D+ = 3, D- = 2
    Analyzing USB device, please wait...
    Find USB device:SPRD U2S Diag (COM35), (VID_1782&PID_4D00)

    Internal version: SPRD3
    Boot downloaded.
    Start boot please wait a moment....
    >>Spreadtrum Boot Block version 1.1

    ReplyDelete
    Replies
    1. Watch the image carefully
      and do as shown in the image

      SPD TAB
      CPU TYPE 6820/8810
      FORMAT
      RUN

      Delete
  2. Replies
    1. Go to spd tab
      Select boot 14 6820/8810
      Now try to format

      Delete
  3. Go to spd tab
    Select boot 14 6820/8810
    Now try to format

    ReplyDelete
  4. hi where is the link for software

    ReplyDelete
    Replies
    1. This software do not work without Volcano box, If you have volcano box then download Volcano tool V3.0.9 and read flash and then format the phone.

      Download Volcano Tool V3.0.9
      http://www.mediafire.com/download/u873t5nl20puj3s/VolcanoUtility_v3.0.9_Volcano+Module.rar

      Delete
  5. Replies
    1. Welcome
      Visit www.FreecomputerTricks.in for more updates and tricks.

      Delete