How to Flash Samsung E1207T With Z3X - www.FreeComputerTricks.in

How to flash samsung e1207t with z3x? Z3X does not have this model, so to flash samsung e1207t with z3x follow the below steps.


Samsung E1207T Flashing Process With Z3X

 
  • Open Samsung 2G Tool
  • Select Model E1202
  • Select Z3X COM Port
  • Select Flash Files
  • Click on Firmware



How to flash Samsung E1207T with Z3X

Samsung E1207T Flash Z3X Log:

Selected model: E1202
Selected com port: COM97
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Phone Detected
Sending loader1... OK
Flash ID: 0004
Set speed - Fail
Send loaders - fail
Patch MSL - FAIL

Elapsed time: 9 second, sw ver: 3.5.0040

If you got this error "Set speed - Fail" while flashing e1207t with z3x Press the power button 3 to 4 seconds after connect the USB Cable to the phone.

------------------------------------------------------------------
Selected model: E1202
Selected com port: COM97
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Phone Detected
Sending loader1... OK
Flash ID: F8F1
Sending loader2... OK
Please wait for patching firmware...
Already patched SW
Please, connect phone and press power button 3 seconds
Phone Detected
Use automatic parameters
Phone in TAT MODE
Phone master IMEI: 00000000000000
Phone slave IMEI: 00000000000000
Phone SW: E1207TDDMF4
Phone CSC: E1207TODDLJ2
Phone BT ADDR: 0000-00-000000
Phone SN: RZ1D825C53
Deactivated MSL - TRUE
[FREZEE]: 73246500
[NET Lock]: 00000000
[Subset Lock]: 00000000
[SP Lock]: 00000000
[CP Lock]: 00000000
[Sim Lock]: 00000000
[Phone Lock]: 84867195
Read info - ok
Elapsed time: 52 second, sw ver: 3.5.0040
------------------------------------------------------------------

3 comments:

  1. Selected model: E1202
    Selected com port: COM8
    Selected speed port: 921600
    Please, connect phone and press power button 3 seconds
    Phone Detected
    Sending loader1... OK
    Flash ID: F816
    Sending loader2... OK
    Please wait for patching firmware...
    Timeout damp
    Read - fail
    Patch MSL - FAIL
    Elapsed time: 72 second, sw ver: 3.5.0040

    ReplyDelete
    Replies
    1. While connect USB cable to phone just press power key for 3-4 seconds and try.

      Delete