Friday, July 4, 2014

How to Flash Micromax X263 With Volcano Tool V2.7.3 Using USB Mode

Here is the topic about, how you can flash Micromax x263 with Volcano Tool using USB Mode, when you insert USB cable to the X263 it will not show any COM port in the Device Manager, so to detect the phone with USB cable you have to the charging connector pin (see the below image No.2). After short this just insert the USB cable to the x263 it will show the COM port, then you can easily flash, read flash, write flash and format the Micromax x263 with Volcano Tool. To do that see the details below.

Micromax X263 CPU Type = MTK 6252
Micromax X263 Flash File Size = 8MB

How to Flash X263 Volcano Tool V2.7.3

  • Open Volcano Tool
  • Go to MTK Tab
  • Click Read Flash or any other option you want
  • Tick on USB Mode
  • Then Click on Start
  • Connect the USB Cable to Phone

Micromax X263 USB Flash done with Volcano Tool V2.7.3

X263 Charging Connector Pin Short to Detect with USB Cable

See the below screenshot to know which pin to short. If the x263 is not detected with USB Cable then this process will help to detect the phone using USB Cable.

Micromax x263 flash with USB Cable process to short to detect in USB Cable (Image No.2)

Note : Remove the short after Flash Complete otherwise the phone will not switch ON.

Micromax X263 USB Mode Volcano Tool Read Flash Log:

Analysis of USB port,Please insert phone USB cable.
  Hardware version:CB02
  Software version:0101
  CPU TYPE:6252
  Internal version:8B00
  Boot downloading complete!
  Flash ID: 00C2002500370000
  Flash Type: SF_MX25U6435E             
  Chip Capacity: 0x800000(8MB)
  Flash reading complete!
>>The data has been saved in C:\Users\XXXXXX\Desktop\x263\WBG1511A_0101_PCB01_GPRS_MT6252_S01.1511A_0101_V0914.BIN, size: 8 M.

No comments:
Write comments

Matched Content