How to Flash Karbonn K595 SPD 6531 CPU With Volcano Tool V3.0.0

Here is the process to flash Karbonn K595 Mobile Phone using Volcano Tool. The phone has SPD SC6531 CPU, So first Read flash of the phone then select the flash file and then format the phone. To flash the Karbonn K595 SPD SC6531 Use latest version of Volcano Tool i.e. v3.0.0 or latter. 

Karbonn K595 CPU Type:
CPU TYPE:SC6531 [65310001]
FLASH ID: 00EF004000160000
Flash Type: SF_W25Q32BV                
Size:0x400000(4MB)


Karbonn K595 Flash With Volcano Tool
Open Volcano tool
Go to SPD tab
Select Boot_15 SC6531
Select Format
Choose the K595 Flash File
Click on Start
Connect the phone using Volcano JIG Cable


Karbonn K595 SPD SC6531 Format Done With Volcano Tool V3.0.0

Note: For SPD SC6531 CPU first Read flash and then select the flash file then format the phone.

Karbonn K595 Format With Volcano Tool Log:
Detection initiated...
  Vcc: null
  Gnd: 5
  Analyzing D+ and D-...
  D+ = 3, D- = 2
  Detection D+/D- with 1.06 seconds.
  Continue to detect BOOT pin...
  Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
  BOOT(Pull Down) = 4
  Setting...
  Find USB device:SCI USB2Serial (COM34), (VID_1782&PID_4D00)
  Pinouts setting complete!
   
  Internal version: SPRD3
  Boot downloaded.
  Start boot please wait a moment....
  Spreadtrum Boot Block version 1.2
  CPU TYPE:SC6531 [65310001]
  FLASH ID: 00EF004000160000
  Flash Type: SF_W25Q32BV               
  Size:0x400000(4MB)
  Set to Factory successfully.

0 comments:

Post a Comment