Tuesday, January 27, 2015

Micromax X501 SPD SC6531 Read Flash and Format Success With Volcano Tool

Now you can format and read flash of Micromax X501, which has SPD SC6531 CPU using Volcano Tool, the below is the process to format the phone using Volcano Utility. 

While flashing SPD SC6531 Chip set, use latest version of Volcano Tool/Utility and Do back up the phone firmware/flash file, then select the flash file when format the phone.

Micromax X501 SC6531 Format Success With Volcano Tool
  • Go to SPD tab
  • Select Format
  • Select built in boot 15
  • Choose the X501 Flash File
  • Tick Auto Detect Pinouts
  • Click on Start

Micromax X501 Format Done with Volcano Tool SC6531
X501 Micromax Volcano Box Log:
Detection initiated...
  Vcc: null
  Gnd: 5
  Analyzing D+ and D-...
  D+ = 3, D- = 2
  Detection D+/D- with 1.34 seconds.
  Continue to detect BOOT pin...
  Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
  BOOT(Pull Down) = 4
  Find USB device:SCI USB2Serial (COM12), (VID_1782&PID_4D00)
  Pinouts setting complete!

  Internal version: SPRD3
  Boot downloaded.
  Start boot please wait a moment....
  Spreadtrum Boot Block version 1.2
  CPU TYPE:SC6531 [65310000]
  FLASH ID: 00C8006000170000
  Flash Type:[GD]  25LG64bWL
  Set to Factory successfully.

Download X501 Flash File
Password For the Zip File = X501fct2015

No comments:
Write comments

Matched Content