Karbonn K46+ Read Flash & Write Flash Done With Volcano Tool V2.6.4

Karbonn K46+ Read Flash & Write Flash Done With Volcano Tool V2.6.4

  May 16, 2014    PARTHASARATHI PANDA

---

Karbonn K46+ Read and Write Flash done with Volcano Tool v2.6.4 using USB Mode, below is the procedure to flash karbonn K46+ with Volcano Tool using USB Cable.

Karbonn K46+ Read Flash Volcano Tool

• Open Volcano Tool

• Go to MTK Tab

• Select Boot 11

• Tick on Read Flash

• Uncheck Auto Detect Pinouts

• Tick on USB Mode

• Click on Run

Then Connect USB Cable to Karbonn K46+ in Switched Off Condition

karbonn k46+ read flash volcano tool mtk 625A cpu

Karbonn K46+ Write Flash Volcano Tool

• Open Volcano Tool

• Go to MTK Tab

• Select Boot 11

• Select Karbonn K46+ .bin Flash file

• Tick on Write Flash

• Uncheck Auto Detect Pinouts

• Tick on USB Mode

• Click on Run

Then Connect USB Cable to Karbonn K46+ in Switched Off Condition

 

karbonn k46+ write flash volcano tool