Karbonn K62+ SPD SC6531 Read Flash and Format Success With Volcano Tool

Karbonn K62+ SPD SC6531 Read Flash and Format Success With Volcano Tool

  September 04, 2015    PARTHASARATHI PANDA

---

How to flash Karbonn K62+? Karbonn K62+ has Spreadtrum CPU SC6531 and flash with Volcano Tool latest version, first full back up the flash file and select the flash file and format the phone, then the phone will work fine. Karbonn K62+ SC6531 dead solution and CPU Details here. The below is the process to flash Karbonn K62+ Mobile Phone.

Karbonn K62+ CPU Details:

• Spreadtrum Boot Block version 1.2
• CPU TYPE:SC6531 [65310000]
• FLASH ID: 00C8006000180000
• Flash Type:[GD]  25LQ128YIG
• Size:0x1000000(16MB)

Karbonn K62+ SPD SC6531 Read Flash Done With Volcano Tool

Karbonn K62+ SPD SC6531 Format Success With Volcano Tool

Karbonn K62+ Volcano Tool Log:
Detection initiated...
  Vcc: null
  Gnd: 5
  Analyzing D+ and D-...
  D+ = 3, D- = 2
  Detection D+/D- with 1.06 seconds.
  Continue to detect BOOT pin...
  Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
  BOOT(Pull Down) = 4
  Setting...
  Find USB device:SCI USB2Serial (COM34), (VID_1782&PID_4D00)
  Pinouts setting complete!
   
  Internal version: SPRD3
  Boot downloaded.
  Start boot please wait a moment....
  Spreadtrum Boot Block version 1.2
  CPU TYPE:SC6531 [65310000]
  FLASH ID: 00C8006000180000
  Flash Type:[GD]  25LQ128YIG
  Size:0x1000000(16MB)
>>Set to Factory successfully.