Smart Phone Flash Tool Error Collection and Possible Solution
Here are some error comes, while you use SP flash tool or Smartphone flash tool to flash MTK phones. So here you will see the error message and find a possible solution regarding that, If you need to share your success of solution about the SP flash tool errors, then you can post through comments. Please see the below errors for Smart Phone Flash Tool and Solution.
 |
| Smart Phone Flash Tool Errors and Solutions |
Flash Tools Error Collection & Possible Solution Here:
Here is the few solution for Smart Phone Flash Tool errors, just follow the below error messages and solution.
Credits: SP tools
1.BROM Error
S_UNKNOWN_TARGET_BBCHIP
[Description]
Unsupported target baseband chip type!
[Solution]
Please upgrade to the latest Flash Tool then try again.
S_UNSUPPORTED_VER_OF_BOOT_ROM
[Description]
Unsupported Boot ROM!
[Solution]
Please upgrade to the latest Flash Tool then try again.
S_SEC_INFO_NOT_FOUND
[Description]
Your ROM files doesn't enable secure feature! Secure-on BB must boot up with secure-on ROM files!
[Solution]
Please use a secure-on ROM file then try again.
S_BROM_DOWNLOAD_DA_FAIL
[Description]
[H/W] Fail to download DA to baseband chip's internal SRAM!
[Reason]
1.There’s a cable communication problem between Flash Tool and Boot ROM.
2.Target might be shutdown unexpectedly or target lost power supply.
3.The DA is not correct.
[Solution]
1.Try again.
2.Proceed H/W checking in download cable and target side com port.
3.Monitor if power-drop occurred in target side.
S_BROM_BBCHIP_HW_VER_INCORRECT
[Description]
[H/W] Target baseband chip is inconsistent with bin files!
[Solution]
Please select the correct image files for the target's baseband chip.
S_BROM_AUTOBAUD_FAIL
[Description]
[H/W] Boot ROM start command passed but fails to multiple Boot ROM baud rate!
[Reason]
1.There's a cable communication problem between Flash Tool and Boot ROM.
2.Target might be shutdown unexpectedly.
[Solution]
1.Try again.
2.Speed-Up Boot ROM baud rate” in advance mode (CTRL+ALT+V) then try again.
3.Proceed H/W checking in download cable and target side UART path.
4.Monitor if power-drop occurred in target side.
S_BROM_EXCEED_MAX_DATA_BLOCKS
[Description]
[MAUI] The number of Multi-Bin files is more than 10!
[Solution]
1.Please don't build more than 10 binary files.
S_DA_INT_RAM_ERROR
[Description]
The download image is not match with phone memory.
[Solution]
Please select correct image to match with phone memory and try again.
S_DA_EXT_RAM_ERROR
[Description]
[H/W] DA didn't detect external RAM!
[Solution]
It maybe a SMT or an EMI issue, please use another phone to download.
S_DA_NAND_BLOCK_DATA_UNSTABLE
[Description]
[H/W] Data of the block is unstable after erasing NAND Flash!
[Reason]
It maybe a SMT issue.
[Solution]
Please format all flash or use another phone to download.
S_SECURITY_SLA_INVALID_AUTH_FILE
[Description]
[User] An invalid authentication file is used!
[Solution]
This error message will occurs with MSP (MTK Secure Platform) code, Please keep up the MSP code and ask for help.
S_SECURITY_SF_SECURE_VER_CHECK_FAIL
[Description]
[User] The secure version of the secure-MAUI is older than that in the handset
[Solution]
Please choose a secure-MAUI with an equal or newer secure version.
S_SECURITY_DAA_FAIL
[Description]
lDA Security download error!
[Solution]
Security DA is not signed by a correct key, please select correct DA and try again.
S_DA_UPDATE_BOOTLOADER_EXIST_MAGIC_NOT_MATCHED
[Description]
DA DSP_BL check exist error.
[Solution]
There is no DSP_BL in previous load on target, please format all and download again.
Here is the few solution for Smart Phone Flash Tool errors, just follow the below error messages and solution.
Credits: SP tools
1.BROM Error
S_UNKNOWN_TARGET_BBCHIP
[Description]
Unsupported target baseband chip type!
[Solution]
Please upgrade to the latest Flash Tool then try again.
S_UNSUPPORTED_VER_OF_BOOT_ROM
[Description]
Unsupported Boot ROM!
[Solution]
Please upgrade to the latest Flash Tool then try again.
S_SEC_INFO_NOT_FOUND
[Description]
Your ROM files doesn't enable secure feature! Secure-on BB must boot up with secure-on ROM files!
[Solution]
Please use a secure-on ROM file then try again.
S_BROM_DOWNLOAD_DA_FAIL
[Description]
[H/W] Fail to download DA to baseband chip's internal SRAM!
[Reason]
1.There’s a cable communication problem between Flash Tool and Boot ROM.
2.Target might be shutdown unexpectedly or target lost power supply.
3.The DA is not correct.
[Solution]
1.Try again.
2.Proceed H/W checking in download cable and target side com port.
3.Monitor if power-drop occurred in target side.
S_BROM_BBCHIP_HW_VER_INCORRECT
[Description]
[H/W] Target baseband chip is inconsistent with bin files!
[Solution]
Please select the correct image files for the target's baseband chip.
S_BROM_AUTOBAUD_FAIL
[Description]
[H/W] Boot ROM start command passed but fails to multiple Boot ROM baud rate!
[Reason]
1.There's a cable communication problem between Flash Tool and Boot ROM.
2.Target might be shutdown unexpectedly.
[Solution]
1.Try again.
2.Speed-Up Boot ROM baud rate” in advance mode (CTRL+ALT+V) then try again.
3.Proceed H/W checking in download cable and target side UART path.
4.Monitor if power-drop occurred in target side.
S_BROM_EXCEED_MAX_DATA_BLOCKS
[Description]
[MAUI] The number of Multi-Bin files is more than 10!
[Solution]
1.Please don't build more than 10 binary files.
S_DA_INT_RAM_ERROR
[Description]
The download image is not match with phone memory.
[Solution]
Please select correct image to match with phone memory and try again.
S_DA_EXT_RAM_ERROR
[Description]
[H/W] DA didn't detect external RAM!
[Solution]
It maybe a SMT or an EMI issue, please use another phone to download.
S_DA_NAND_BLOCK_DATA_UNSTABLE
[Description]
[H/W] Data of the block is unstable after erasing NAND Flash!
[Reason]
It maybe a SMT issue.
[Solution]
Please format all flash or use another phone to download.
S_SECURITY_SLA_INVALID_AUTH_FILE
[Description]
[User] An invalid authentication file is used!
[Solution]
This error message will occurs with MSP (MTK Secure Platform) code, Please keep up the MSP code and ask for help.
S_SECURITY_SF_SECURE_VER_CHECK_FAIL
[Description]
[User] The secure version of the secure-MAUI is older than that in the handset
[Solution]
Please choose a secure-MAUI with an equal or newer secure version.
S_SECURITY_DAA_FAIL
[Description]
lDA Security download error!
[Solution]
Security DA is not signed by a correct key, please select correct DA and try again.
S_DA_UPDATE_BOOTLOADER_EXIST_MAGIC_NOT_MATCHED
[Description]
DA DSP_BL check exist error.
[Solution]
There is no DSP_BL in previous load on target, please format all and download again.
nice post
ReplyDelete