Saturday, April 14, 2018

How To Get The EMMC FRP Base Address and Length [HEX]

Today you will learn an interesting topic about manual erasing the FRP using SP Flash Tool but before you format Factory Reset Protection FRP HEX address, it's very important to know the perfect EMMC HEX address and length of FRP of the Android smart phone. So here you will know how to get the FRP address and length in the EMMC and then you can format phone using the same address to remove FRP lock of your phone.

How to Get EMMC Information:

To get the EMMC info or EMMC information you need to use any tool that support MediaTek read info and supports all latest mediatek MTK chip-sets. You can use Miracle Box V2.54 which is working without Box [Download Here] to read EMMC info to get the FRP address and length. To format FRP lock you can use Smartphone Flash Tool or SP Flash Tool, see the below details to know how remove FRP lock by formatting with SP Flash Tool.

How To Get The EMMC FRP Base Address and Length [HEX] Miracle Box
For Example:
Here is a phone with MediaTek MT6753 runs on Android 6.0 with so and so manufacturer and brand, after readinfo with Miracle Tool v2.54 we get the following EMMC information and in this EMMC info you will get the FRP begin address and length, just have look below.

MediaTek MT6753 EMMC Info:

   PROINFO  BaseAddr:0x80000  Size:0x300000
  NVRAM  BaseAddr:0x380000  Size:0x500000
  PROTECT1  BaseAddr:0x880000  Size:0xA00000
  PROTECT2  BaseAddr:0x1280000  Size:0xA00000
  LK  BaseAddr:0x1C80000  Size:0x80000
  PARA  BaseAddr:0x1D00000  Size:0x80000
  BOOT  BaseAddr:0x1D80000  Size:0x1000000
  RECOVERY  BaseAddr:0x2D80000  Size:0x1000000
  LOGO  BaseAddr:0x3D80000  Size:0x800000
  EXPDB  BaseAddr:0x4580000  Size:0xA00000
  SECCFG  BaseAddr:0x4F80000  Size:0x80000
  OEMKEYSTORE  BaseAddr:0x5000000  Size:0x200000
  SECRO  BaseAddr:0x5200000  Size:0x600000
  KEYSTORE  BaseAddr:0x5800000  Size:0x800000
  TEE1  BaseAddr:0x6000000  Size:0x500000
  TEE2  BaseAddr:0x6500000  Size:0x500000
  FRP  BaseAddr:0x6A00000  Size:0x100000
  NVDATA  BaseAddr:0x6B00000  Size:0x2000000
  METADATA  BaseAddr:0x8B00000  Size:0x2500000
  SYSTEM  BaseAddr:0xB000000  Size:0x90000000
  CACHE  BaseAddr:0x9B000000  Size:0x19000000
  USERDATA  BaseAddr:0xB4000000  Size:0x692B80000
  FLASHINFO  BaseAddr:0x746B80000  Size:0x1000000

Just check the above bold line which contains FRP base address and size, then you can use the same details in SP Flash Tool and format the FRP lock, to format with flash tool please see the below example.

Format FRP Lock With SP Flash Tool:

How to format FRP lock using SP flash tool
  • So now we got the FRP Address and length which is (FRP  BaseAddr:0x6A00000  Size:0x100000)
  • Now open SP flash tool and go to Format Tab
  • Then select "Manual Format Flash" and give the begin address and length to format.
  • Here we have begin address 0x6A00000 and length 0x100000
  • Enter the begin address [HEX] and Format Length [HEX]
  • Then click on Start button and connect the switched off phone to PC.

No comments:

Post a Comment

Please Share Your Thoughts