Micromax D303 Network Antenna Ways

Micromax D303 Network Antenna Ways

  December 05, 2017    PARTHASARATHI PANDA

---

Here we will show you, how to solve Micromax D303 network problem? If the phone OK with the firmware and IMEI then you can try the following hardware solution and network ways to the external antenna flex or external antenna signal receiver main connector. As shown in the below image check the connectivity if the connection is not good or broken then apply jumper. If the external antenna is not good connect the two antenna connector point with a insulated copper wire (at-least 3 inch wire) it will work as external antenna.

Fault Tags:
Micromax D303 network solution, Micromax d303 no network, emergency calls only, no service, failed to search network, failed to register on network, error while searching networks etc.

Micromax D303 Network Ways:

Please see the below image and apply jumper to the antenna point.

Micromax D303 Network Solution, network ways and no service

Apply jumper as shown in the above image and you will able to solve network problem in Micromax Android smart phones and here is the example of Micromax D303.

Read More

XOLO ERA2X No Network Solution Here

XOLO ERA2X No Network Solution Here

  December 03, 2017    PARTHASARATHI PANDA

---

Xolo Era 2X or ERA2X Network ways or no network hardware solution. In this topic you will find the complete network ways, antenna ways or jumper ways for Xolo Era 2x Android phone. If the phone has no network or error while searching for network or no network found or emergency calls only or failed to connect to network or unable to register on network, then this topic will help you to find out the solution for the network problem on your Android smart phone for the model Xolo Era2X.

Xolo Era2X No Network Solution:

1) Please check the connectivity to the antenna pin/connector as shown in the images below.
2) Then check the network cable.
3) Then check the external antenna flex.

XOLO ERA2X Network Ways in the Motherboard:

Xolo Era2x Network Ways in the Motherboard

XOLO ERA2X Network ways in the charging PCB:

Xolo Era2x Network Ways 2 in the charging PCB

As shown in the above images, please check the connectivity, if the connection to the external antenna flex pin is not OK then apply jumper and the network problem of Xolo Android smart phone will solved.

Read More

Intex Aqua Young No Network Solution Here

Intex Aqua Young No Network Solution Here

  November 27, 2017    PARTHASARATHI PANDA

---

Hi Welcome to Free Computer Tricks, today we will know the no network solution of Intex Aqua Young Android smart phone. If you are facing No network problem, Emergency calls only, error while searching for network, unable find network, failed to search network and unable register on network on the Intex Aqua Young smart phone, then this topic will help you to find out the network solution on the phone.

Intex Aqua Young Network Solution - Error while searching network

In this (Intex Aqua Young) phone you will see two copper points, which connects with signal booster circuit on the back cap. In this tow points one is ground and another is from the internal antenna,  when these two point are connected with the external signal booster, the phone receive the GSM or CDMA signal according to SIM card you used. So if the both signal point is grounded on the board itself then you must not get the proper signal.

You can check these two point with the multi-meter, if the both points are ground then you just follow the below steps to solve the network problem on the Android smart phone, here we will solve the Intex Aqua Young No Network problem. 

Intex Aqua Young Network Solution:

1) Remove the components near internal antenna.
2) Then apply jumper from the antenna to the network point.

Please see the image above for better understand and apply jumper as shown in the image or you can see the below zoomed image of the network jumper in Intex Android phone.

Intex Aqua Young No Network Solution, Network ways, Network Jumper, Error while searching network

See the above image, remove some components near internal antenna and apply jumper to copper point, which is the way to external signal booster of the phone.

Tags: error while searching for network, error while searching for networks Intex, error while searching for networks Android, error while searching for networks Spreadtrum Android phone, no service selected network unavailable, failed network error, failed to register on network, emergency calls only Intex Android Smart Phone, unable to register on network, not registered on network, how to fix not registered on network, no service android fix, no service Intex smart phone.

Read More