How To Flash Karbonn K9 Smart Yuva Hang On Logo - Solved

How To Flash Karbonn K9 Smart Yuva Hang On Logo - Solved

  May 17, 2018    PARTHASARATHI PANDA

---

How To Flash Karbonn K9 Smart Yuva Hang On Logo, Karbonn K9 Smart Yuva Stuck On "System.img" When Flashing, Karbonn K9 Smart Yuva Flashing Failed With FactoryDownload Tool, Karbonn K9 Smart Yuva Flashing Error, Karbonn K9 Smart Yuva Flash File Download - Get All Solutions Here.

Here you will get solutions, if you face the above errors on the Karbonn K9 Smart Yuva Smartphone and While flashing the phone. You can also download Karbonn K9 Smart Yuva firmware and K9 smart yuva flash tool here, please go through this article.

How To Flash Karbonn K9 Smart Yuva Hang On Logo - Solved

Watch "How To Flash Karbonn K9 Smart Yuva Hang On Logo" Video Tutorial | YouTube Link

How To Flash Karbonn K9 Smart Yuva Without Errors?

• Download Karbonn K9 Smart Yuva Firmware and Flash Tool (Link Given Below)
• Open SPD_Upgrade_Tool_R4.0.0001 and Load Karbonn_K9_Smart_Yuva_V18_2017_10_19.pac
• Now Click Start Download Button and Connect the Switched Off Phone With Flash Mode.
• Karbonn K9 Smart Yuva Flash Mode = Press Volume Down Key and Insert USB Cable
• Wait until you see Passed on the Progress Bar.

Karbonn K9 Smart Yuva V18 Flash OK - Hang On Logo - Solved

Now disconnect the phone from Computer and switch on it. Switch on the Karbonn phone after flash and you need to setup the phone as it is restored to factory defaults. Now you have successfully flashed the faulty Karbonn K9 smart Yuva.

Note: This topic is only for Tutorial purpose, although this process is tested and 100% working but we are not responsible for any damage happens to the phone.

Karbonn K9 Smart Yuva Not Connected With Flash Tool:
If you are not able to connect the phone or the Spreadtrum flash tool not detects the phone or if the Karbonn K9 not showing COM port, then please try the followings.

• Switch off the phone then Hold Volume Down and Connect USB Cable.
• Remove Battery and then Hold Volume Down and Connect USB Cable
• Check Karbonn K9 Smart USB Driver is Installed Properly.
• If still not success then check the Phone Charging Connector.

Downloads:
Karbonn K9 Smart Yuva V18 | Download
Karbonn K9 Smart Yuva V19 | Download
File Credit: GsmDevelopers
Password: GD_Mekail92@Gsm Developers

K9 Smart Phone Info:
Brand: Karbonn
Model: K9 Smart Yuva
H/W Version: S505_1_10
S/W Version: Karbonn_K9_Smart_Yuva_V18

SPD FLASH TOOL R4.0.0001 | DOWNLOAD

So in this way you can flash Karbonn K9 Smart Yuva Without facing any flashing errors. If the phone is hangs in logo or facing flash tool errors or failed to flash the phone or dead after flash then this topic will be very helpful to you.

Read More

Samsung J2 Stuck On Logo Hardware Solution

Samsung J2 Stuck On Logo Hardware Solution

  November 17, 2017    PARTHASARATHI PANDA

---

You may face this problem on Samsung J2, it hangs or stuck on Android Logo and after flashing firmware also same problem. Here we will show you the Hardware Repair solution for Samsung J2 hangs on logo. In this case you can boot into Download mode and flash the phone but not success, after flashing firmware also same hang on Samsung Android logo. So here is the solution for Samsung J2 hangs on logo using hardware trick.

Samsung J2 Hang on logo hardware solution

When You Can Try For Hardware Repair:

First flash the Samsung J2 if not success.
Remove the LCD Connector, If the phone is switched on (you can hear a switch on sound).
If you are not able boot in to Recovery mode only can boot into Download mode.

Note: If you are a Mobile Technician then try this method otherwise don't, we are not responsible for any damage happen to the phone.

Samsung J2 Stuck/Hang On Logo Hardware Solution:

1- Replace LCD and Touch it will solve your problem.
2- Clean the Touch connector carefully and then check.
3- If you still not success then it must be the EMMC problem.

Read More

Samsung J2 (SM-J200G/DD) Hang On Logo Solution Here

Samsung J2 (SM-J200G/DD) Hang On Logo Solution Here

  November 17, 2017    PARTHASARATHI PANDA

---

Today we will discuss about, one of the common problem on Samsung J2 SM-J200G/DD, which is hang on logo or stuck on logo and how to solve it. So here we will show you how to find out the proper solution for the Samsung J2 hang on logo.

Samsung J2 SM-J200G Hang on logo solution

Let's Understand:

When you switch on a working Samsung J2 phone you will see two boot screen or logo of Samsung, the first boot logo is "Samsung Galaxy J2 Powered By Android" and the other one is "SAMSUNG" which you will see just after a few seconds  of the first boot screen. The second boot logo comes with a animated effect and you will here the boot sound of Samsung, So here we know and clear that there are 2 types of logo appear on the Samsung J2 screen when we switch on the phone.

First Logo is "Samsung Galaxy J2 Powered By Android"
Second Logo is  "SAMSUNG"

So when you try to find out the solution for the hang on logo problem on Samsung J2, first check the problem whether it's stuck on the first boot logo or on the second boot logo. If the phone stuck on first boot logo then it's 100% due to hardware problem and if it's suck on the second boot logo then it's the software problem, in that case you can flash the phone with latest Samsung J2 firmware and recover the phone.

Samsung J2 Hang On Logo Due To Hardware Fault:

How we can check that the Samsung J2 hang on logo problem is due to hardware fault? as I said before if the phone hang on the first boot logo then it's the hardware fault, to confirm that you can check the below.

• You will not able to boot in to Recovery mode.
• If you remove the LCD connector you will hear the boot sound and the phone will switch on.

How to Solve Samsung J2 Hang on logo:

If the phone hang on second boot logo that means it's having some Firmware or Software issue, in that case you can flash the phone and it will be OK for you. If you have the hardware issue, it can be solved by replacing LCD and Touch. You can also clean the touch connector and try.

Read More